File Uploading Library
revIgniter's File Uploading Library permits files to be uploaded. You can set various preferences, restricting the type and size of the files.
Uploading a file involves the following general process:
- An upload form is displayed, allowing a user to select a file and upload it.
- When the form is submitted, the file is uploaded to the destination you specify.
- Along the way, the file is validated to make sure it is allowed to be uploaded based on the preferences you set.
- Once uploaded, the user will be shown a success message.
To demonstrate this process here is brief tutorial. Afterward you'll find reference information.
Creating the Upload Form
Using a text editor, create a form called uploadFormView.lc. In it, place this code and save it to your applications/views/ folder:
<!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>[[gData["pageTitle"] ]]</title> </head> <body> [[gData["uploadError"] ]] [[gData["formOpen"] ]] [[gData["input"] ]] <br /><br /> [[gData["submit"] ]] </form> </body> </html>
You'll notice we have a gData["formOpen"] variable which is declared in the controller using a form helper to create the opening form tag. File uploads require a multipart form, so the helper creates the proper syntax for you. You'll also notice we have a gData["uploadError"] variable. This is so we can show error messages in the event the user does something wrong.
The Success Page
Using a text editor, create a form called uploadSuccessView.lc. In it, place this code and save it to your applications/views/ folder:
<!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>[[gData["pageTitle"] ]]</title> </head> <body> <h3>Your file was successfully uploaded!</h3> <? put "<ul>" into tUploadData repeat for each key tKey in gData["uploadData"] put gData["uploadData"][tKey] into tVal put "<li>" & tKey & ":" && tVal & "</li>" after tUploadData end repeat put "</ul>" after tUploadData return tUploadData ?> <p>[[gData["uploadLink"] ]]</p> </body> </html>
Using a text editor, create a controller called upload.lc. In it, place this code and save it to your applications/controllers/ folder:
<?rev put "doUpload,buildForm,upload,index" into gControllerHandlers command upload put "form,url" into tHelpers rigLoadHelper tHelpers # SET PAGE TITLE put "Upload Form" into gData["pageTitle"] end upload command index buildForm # LOAD THE VIEW FILE get rigLoadView("uploadFormView") end index command buildForm put rigFormOpenMultiPart("upload/doUpload") into gData["formOpen"] put "userfile" into tData["name"] put "20" into tData["size"] put rigFormUpload(tData) into gData["input"] put rigSubmitButton("uploadBtn", "upload") into gData["submit"] end buildForm command doUpload put "./uploads/" into tConfig["UploadPath"] put "gif|jpg|png" into tConfig["AllowedTypes"] put 100 into tConfig["MaxSize"] put 1024 into tConfig["MaxWidth"] put 768 into tConfig["MaxHeight"] rigLoaderLoadLibrary "Upload", tConfig rigDoUpload if the result is FALSE then put rigDisplayUploadErrors() into gData["uploadError"] buildForm # LOAD THE VIEW FILE get rigLoadView("uploadFormView") else put rigUploadData() into gData["uploadData"] put rigAnchor("upload", "Upload Another File!") into gData["uploadLink"] # LOAD THE VIEW FILE get rigLoadView("uploadSuccessView") end if end doUpload --| END OF upload.lc --| Location: ./system/application/controllers/upload.lc ----------------------------------------------------------------------
The Upload Folder
You'll need a destination folder for your uploaded images. Create a folder at the root of your revIgniter installation called uploads and set its file permissions to 777.
To try your form, visit your site using a URL similar to this one:
You should see an upload form. Try uploading an image file (either a jpg, gif, or png). If the path in your controller is correct it should work.
Loading the Upload Library
Like most other libraries in revIgniter, the Upload library is loaded in your controller using the rigLoaderLoadLibrary command:
Similar to other libraries, you'll control what is allowed to be uploaded based on your preferences. In the controller you built above you set the following preferences:
put "./uploads/" into tConfig["UploadPath"] put "gif|jpg|png" into tConfig["AllowedTypes"] put 100 into tConfig["MaxSize"] put 1024 into tConfig["MaxWidth"] put 768 into tConfig["MaxHeight"] rigLoaderLoadLibrary "Upload", tConfig # Alternately you can set preferences by calling the rigInitializeUpload command. Useful if you auto-load the library: rigInitializeUpload tConfig;
The above preferences should be fairly self-explanatory. Below is a table describing all available preferences.
The following preferences are available. The default value indicates what will be used if you do not specify that preference.
|UploadPath||None||None||The path to the folder where the upload should be placed. The folder must be writable and the path must be relative to the root of your revIgniter installation.|
|AllowedTypes||None||None||The mime types corresponding to the types of files you allow to be uploaded. Usually the file extension can be used as the mime type. Separate multiple types with a pipe. Use a wildcard "*" to allow all types.|
|FileName||None||Desired file name||
If set revIgniter will rename the uploaded file to this name. The extension provided in the file name must also be an allowed file type.
|Overwrite||FALSE||TRUE/FALSE||If set to true, if a file with the same name as the one you are uploading exists, it will be overwritten. If set to false, a number will be appended to the filename if another with the same name exists.|
|MaxSize||0||None||The maximum size (in kilobytes) that the file can be. Set to zero for no limit.|
|MaxWidth||0||None||The maximum width (in pixels) that the file can be. Set to zero for no limit.|
|MaxHeight||0||None||The maximum height (in pixels) that the file can be. Set to zero for no limit.|
|MaxFilename||0||None||The maximum length that a file name can be. Set to zero for no limit.|
|EncryptName||FALSE||TRUE/FALSE||If set to TRUE the file name will be converted to a random encrypted string. This can be useful if you would like the file saved with a name that can not be discerned by the person uploading it.|
|RemoveSpaces||TRUE||TRUE/FALSE||If set to TRUE, any spaces in the file name will be converted to underscores. This is recommended.|
Setting preferences in a config file
If you prefer not to set preferences using the above method, you can instead put them into a config file. Simply create a new file called upload.lc, add the Config array in that file. At the end of the file write: rigRunInitialUploadConfig yourArrayVariableName. Then save the file at config/upload.lc and it will be used automatically. You will NOT need to use the rigInitializeUpload command if you save your preferences in a config file. Example:
local sUploadConf put "./uploads/" into sUploadConf["UploadPath"] put "gif|jpg|png" into sUploadConf["AllowedTypes"] put 100 into sUploadConf["MaxSize"] put 1024 into sUploadConf["MaxWidth"] put 768 into sUploadConf["MaxHeight"] rigRunInitialUploadConfig sUploadConf
The following handlers are available
Performs the upload based on the preferences you've set. Note: By default the upload routine expects the file to come from a form field called userfile, and the form must be a "multipart type:
<form method="post" action="some_action" enctype="multipart/form-data" />
If you would like to set your own field name simply pass its value to the rigDoUpload command:
put "someFieldName" into tFieldname rigDoUpload tFieldname
Retrieves any error messages if the rigDoUpload command returned false. The function does not write to the page automatically, it returns the data so you can assign it however you need.
By default the above function wraps any errors within <p> tags. You can set your own delimiters like this:
This is a helper function that returns an array containing all of the data related to the file you uploaded. Here is a prototype of the array returned:
tData["FileName"] # => mypic.jpg tData["FileType"] # => image/jpeg tData["FilePath"] # => /path/to/your/upload/ tData["FullPath"] # => /path/to/your/upload/jpg.jpg tData["RawName"] # => mypic tData["OrigName"] # => mypic.jpg tData["ClientName"] # => mypic.jpg tData["FileExt"] # => .jpg tData["FileSize"] # => 22.2 tData["IsImage"] # => TRUE tData["ImageWidth"] # => 800 tData["ImageHeight"] # => 600 tData["ImageType"] # => jpeg tData["ImageSizeStr"] # => height="600" width="800"
Here is an explanation of the above array items.
|FileName||The name of the file that was uploaded including the file extension.|
|FileType||The file's Mime type.|
|FilePath||The absolute server path to the file.|
|FullPath||The absolute server path including the file name.|
|RawName||The file name without the extension.|
|OrigName||The original file name. This is only useful if you use the encrypted name option.|
|ClientName||The file name as supplied by the client user agent, prior to any file name preparation or incrementing.|
|FileExt||The file extension with period.|
|FileSize||The file size in kilobytes.|
|IsImage||Whether the file is an image or not. TRUE = image. FALSE = not.|
|ImageType||Image type. Typically the file extension without the period.|
|ImageSizeStr||A string containing the height and width. Useful to put into an image tag.|